The Samsung Galaxy Note 4 is the new addition to the popular Galaxy Note line-up from Samsung. Presented with great goals, the Samsung Galaxy Note 4 really proved its mettle with the advanced hardware and the gorgeous looks.
Many of the Note 4 versions are rooted using the CF-Auto-Root firmware developed by the popular developer Chainfire who is behind the development of SuperSU application which is most commonly used for the root permission manager on Android devices.
The Chainfire-Auto-Root firmware flashes the stock recovery and cache along the SuperSU binaries & SuperSU application, so that users can keep their gadgets as close to stock as possible. The firmware can be flashed using the Odin flashing tool that is especially developed for the Samsung devices. If you’re familiar with Odin, the procedure is very smooth. However if you’re not, very carefully follow the firmware flashing guide.
Disclaimer:
This Guide is intended only for the Galaxy Note 4 SM-N910T, not for any other device of Samsung. Be extra cautious if you select the root firmwares as flashing wrong firmwares might effect in a bricked device.
Rooting & flashing firmwares will void your device warranty both temporarily or permanently. You alone are responsible for any effects that might occur during the process. SoftsTech shall not be held responsible for any damage to your device.
PREPARE YOUR Galaxy Note 4:
1. Charge your Note 4 above 60% battery level to avoid shutdowns during the process.
2. Enable USB Debugging
3. Install Required USB Drivers
4. Backup your device storage, Contacts and SMS.
How to Root Samsung Galaxy Note 4 SM-N910T Step by Step:-
Step No 1: Download And Install Samsung USB Drivers on Your Computer or Laptop.
Step No 2: Download & extract the root files on your PC Desktop.
Step No 3: Now Power off your Note 4.
Step No 4: After switching off the smartphone, you require to boot into Download. To boot into download mode press & hold Volume down and Power button for few seconds until download mode is active.
Step No 5: When you see Warning Sign then press the Volume up key to continue.
Step No 6: Now open Odin3 and locate the extracted files, that you’ve downloaded on your Computer.
Step No 7: Now connect your Galaxy Note 4 to the Computer via cable.
Step No 8: Once you connected the Phone to the Computer, Odin will automatically detect the device and displayed “Added” message at the lower-left panel.
Step No 9: Once your Galaxy Note 4 is recognized by Odin, click on the PDA button and select root files.
Step No 10: Now, click on “start” and wait while the root process is completed.
Step No 11: Once Rooting is completed you’ll be able to see a Green box with Pass written on it in Odin.
Step No 12: Unplug the USB cable and reboot your device.
That’s it folks! Your Samsung Galaxy Note 4 is successfully rooted and you’re ready to use advanced applications on your device. if you have any question regarding this post let us in comments area!
